Skip to main content
Questions?  1-877-404-8449
ResourceMFG | Manufacturing Workforce Specialists

Job Information

Description

Garden Grove, CA
1st shift
5am - 3:30pm
Monday - Thursday

**Looking for A 5 AXIS CNC Programmer

5 AXIS
We are custom plastic thermoformers. (please see our website) A major part of our business is aerospace. Our Heavy Gauge department makes all sorts of aircraft cabin interior parts which are thermoformed and require 5-Axis CNC Router trimming to cut the parts out and finish trim. We are 100% 3D solid model based and do not do any of the part trimming by hand. All parts are trimmed on one of our (7) CNC 5-Axis Router Mills.

The ideal candidate would be a 5-Axis Programmer who has similar experience programming trim cutting paths and setting up CNC 5-Axis Router trim fixtures and trimming projects. The software package that we use here is MasterCAM. I cannot emphasize the “experience” factor enough. We need a candidate who has done this sort of thing before and can, literally, hit the ground running. This job is very mobile and will allow the individual to have the run of the department to make things happen. We have very good teams in place both on the shop floor and in management. This person will be their own boss and will be provided everything needed to get the job done.

The ideal candidate would have experience with everything involved in taking a 3D computer model, using it to program finished part cutting paths, setting up and final prep of trimming fixtures, and following through with making FAI (First Article Inspection) parts for approval.

We have (7) CNC 5-Axis Router Mills. (2) each DMS & Motion Master with Fagor controls. And (3) Thermwood routers (which have the standard Thermwood control)

We also have a Faro Arm (portable CMM) that we use for orientation and setup of trimming fixtures and checking trim cuts. So, experience using a CMM would be a big plus. We currently have (2) programmers who handle these duties, and we need to augment our staff to increase production.

Job Requirements

Requirements:

 

Prior 5 Axis Machinst Experience 

Machinist Programer 

3D computer model, using it to program finished part cutting paths

Setting up and final prep of trimming fixtures

Following through with making FAI (First Article Inspection) parts for approval.

Apply Now