ResourceMFG has Positions at a Tire Manufacturer in Paris
Shift: 2nd shift(5:00pm -1:30am)
Pay: $15.25\hr plus any Overtime
Tire Insert: receive tires, tires are moved onto conveyor from trailer. The conveyor expands and raises to make the position easier. 1 employee would put the tires on the conveyor. Quality in this area – stripes on tire need to be a certain way. General housekeeping
Wheel Insert – Wheels are put on conveyor from pallet, place a sticker on the wheel, cycle time is 10-13 seconds, insert a TPM (Tire Pressure Monitor), 90% snap on, 10% screw on. Retorque area – make sure the wheel is oriented the correct way to go through the assembly machine and if a screw on TPM use a pneumatic tool to screw in to correct tightness.
There is a test to make sure there are no leaks. The balancer machine marks where the wheel weights go. The outside weight is clamp on and the inside weight is taped. Then the wheel & tire assembly goes to an Audit Balancer, it kicks out any that aren’t balanced correctly. An AOA probably wouldn’t run this process.
Inspection-this takes more experience and training, labeling, tracking, check valve stem, type, color, correct wheel and tire, visual inspection, scan QR codes.
A machine stacks the tires into set and goes into Gantry for storage. Robots pull orders based on orders from TMMK that go straight to the computer.
Everyone is cross trained and rotate every 1-2 hours.
Ability to read and follow instructions
Lift, stoop, bend, twist, reach and pull up to 50lbs