Questions? 1-877-404-8449

This job is no longer available, but here are some other jobs:

Saw Operator

Greenville SC (19 miles)

We are looking to fill a 1ST shift saw operator position at Wright Metal products in Greenville SC. This is a contract to hire position. Pay rates between $14 - $17 per hour depending upon experience.

Employees will operate a saw to cut various metals to specific lengths & angles, all within specified tolerances noted on prints.

Must be able to read prints.

Benefits offered!

Apply Now More Info

Painter

Greenville SC (19 miles)

We are looking to fill a painter position at Wright Metal Products in Greenville, SC. This is a 2nd shift position that will pay between $14-$18 an hour depending upon experience.

Painter will operate electro-static & conventional spray equipment.

Benefits offered!

Apply Now More Info

Assembler

Taylors SC (22 miles)

Job Description Under direct supervision, performs routine and repetitive assembly operations and processes, as wells as assembles fabricated parts to relatively large or heavy subassemblies and complete units. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Requires the ability to read electrical schematics and install electrical wiring. Ability to operate light manual machinery. Requires a high school diploma or its equivalent. May be required to complete and apprenticeship and/or formal training in area of specialty. May require 0-3 years of experience in the field or in a related area. Has knowledge commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Millwright experience a plus Welding experience a plus Job Requirements MACHINES, TOOLS, EQUIPMENT, WORK AIDES: Computer Measuring devices such as calipers, micrometers, and tape measures Hand tools Lifting devices such as overhead cranes and hoists Engineering drawings and prints Hours worked Works 9 hour shifts during typical day shift hours. The work week is forty hours. Some overtime may be required to meet production demands. Necessary Skills: Ability to read and interpret engineering drawings Advanced troubleshooting skills Basic maintenance skills Experience handling large parts Experience in hot work (welding, cutting, etc..) Ability to work with little or no supervision Millwright experience a plus Welding experience a plus

Apply Now More Info

Sanitation Technician

Mauldin SC (24 miles)

ResourceMFG is hiring Sanitation Technicians for a food processing facility in Mauldin, SC. These are temp-to-hire jobs on 3rd shift! Pay: $12.25/hr Shift: 6pm-4:30am with overtime as needed Job duties will include but may not be limited to: *Taking lines and machinery apart *Cleaning and sanitizing machinery and reassembling *May assist in other areas as needed ResourceMFG offers all of our employees: *Health, dental, and vision benefits for you and your family! *Weekly pay and direct deposit! *Unlimited referral bonuses! *Cell phone savings and 401K savings!

Apply Now More Info

Saw Operator

greenville SC (24 miles)

We are looking to fill a 1ST shift saw operator position at Wright Metal products in Greenville SC. This is a contract to hire position. Pay rates between $14 - $17 per hour depending upon experience.

Employees will operate a saw to cut various metals to specific lengths & angles, all within specified tolerances noted on prints.

Must be able to read prints.

Benefits offered!

Apply Now More Info

Warehouse Associate

Fountain Inn SC (25 miles)

We are looking to fill a warehouse associate position at Southeaster Products in Fountain Inn, SC. This is a 1st shift position that will pay $11.50 an hour.

 

  • Previous experience in shipping, logistics, or other related fields
  • Ability to handle physical workload
  • Ability to multitask and prioritize
  • Ability to thrive in fast-paced environment
  • Strong organizational skills

Apply Now More Info

Quality Inspector

Greenville SC (28 miles)

We are currently looking for quality inspectors for The Crown Group in Greenville, SC. We are hiring 1st & 2nd shift inspectors. 1st shift is 9:00a-5:30p, 2nd shift is 3:30p-12:00a. Pay is $12:00 an hour.

This is a non-climate controlled facility.

Stand for 8 hours

Must be able to work in non climate controlled environment

Eligible for Hire on after 520 hours

Apply Now More Info

Loader

Greenville SC (28 miles)

We are currently looking for production line loaders for The Crown Group in Greenville, SC. This is for 1st & 2nd shift contract to hire positions that will pay $10.50 per hour with a $0.33 shift differential on 2nd. You will be loading & unloading parts on to racks to be coated with paint. This is a non-climate controlled facility.

Must be able to lift 25lbs repetitively. Stand for 8 hours

Must be able to work in non climate controlled environment

Eligible for Hire on after 520 hours

Apply Now More Info

Multi Craft Maintenance Technician

York SC (40 miles)

World-class manufacturer near Rock Hill, SC that provides quality products on time and at the best value to customers is seeking a strong Multi-Craft Maintenance Technician for their beautiful climate controlled facility. 

In this role, you will repair and maintain machinery - both mechanical and electrical equipment. Troubleshoots mechanical, electrical and control systems to find root causes of trouble; Dismantle devices to gain access to and remove defective parts; Examine form and texture of parts to detect imperfections; Inspect used parts to determine changes in dimensional requirements;  Adjust functional parts of devices and control instruments;  Repair or replace defective parts;  Install special functional and structural parts in devices;  Lubricate and clean parts; Clean machines, internally and externally, as required to maintain good operating efficiency. Follow and perform preventive maintenance to production equipment to minimize downtime.  Set up and operate drill press, grinder, and other metalworking tools to make and repair parts. Initiate purchase order for parts and service; Repair electrical and control equipment. Create work order to define machine issue, enters comments/pictures on action taken to resolve the issue, enter list of parts used to complete the repair, complete and save sign-off of quality group to ensure products made on equipment were verified before resuming equipment in production. For scheduled maintenance, Follows PM check list in mtce software;  perform PM plan, enters comments/pictures as needed to describe machine status during the PM process, completes and saves sign-off of quality group to ensure products made on equipment were verified before resuming equipment in production. 

Apply Now More Info

Maintenance Technician

Newberry SC (50 miles)

Location: Newberry, SC

Shift:  1st Shift - 6:30AM - 3:00PM

Pay Rate: $17.00 - 21.00/HR (DOE)

Job Responsibilities:

  • Perform moderately complex duties to troubleshoot, maintain, and repair all company manufacturing machinery, facilities equipment, and prevention analysis
  • Calibrate mechanical equipment to maintain operating limitis
  • Test devices to troubleshoot electrical, hydraulic, and or mechanical systems for repairs
  • Performs planned PM following established guidelines; recommend further repairs as necessary
  • Other general maintenance duties as required

Apply Now More Info

Supplier Quality Engineer

ROCK HILL SC (51 miles)

Supplier Quality Engineer- DIRECT HIRE- Rock Hill S.C.

 

Supplier Quality Engineer needed to lead and manage all aspects of the company's supplier quality performance while implementing continuous improvement techniques to improve the overall quality of products and processes.

Apply Now More Info

Manufacturing Engineer

Rock Hill SC (51 miles)

Manufacturing Engineer- DIRECT HIRE- Rock Hill S.C.

 

Manufacturing Engineer needed to apply engineering principals to design, modify, or develop facilities, testing, machines, and equipment or processes used in the manufacturing of products.

Apply Now More Info

Quality Engineer

ROCK HILL SC (51 miles)

Quality Engineer- DIRECT HIRE- Rock Hill S.C.

 

Quality Engineer needed to plan and conduct the activities related to the quality of materials, products, and industrial manufacturing processes.

Apply Now More Info

Forklift Operator Order Puller

Rock Hill SC (51 miles)

Rock Hill Food Manufacturer is hiring an experienced Forklift Operator for their Production Line.

Hours: 

  • Monday - Thursday
  • 7:00am-4:00pm
  • Flexible to work Fridays and after 4pm on short notice as business requires

Pay: 

  • $12 per hour based on experience

Essential Duties and Responsibilities:

  • Loading product
  • Maintaining warehouse stock and filling orders
  • Operating a sit-down forklift
  • Lifting 50 - 60 lbs 

Benefits:

  • Production Bonus
  • Stable company
  • 401K
  • Insurance
  • Holiday Pay
  • Climate Controlled Warehouse
  • Growth Opportunity
  • Team Oriented
  • Weekly Pay

Apply Now More Info

Machine Operator

Richburg SC (54 miles)

MACHINE OPERATOR- Richburg SC- $13.50/hr. to start

 

Machine operators needed to inspect and straighten metal bars to specification. 

 

Apply Now More Info

Maintenance

BELMONT NC (55 miles)

Strong mechanical maintenance technician needed with basic electrical (motor starters and ribbon brakes). Will train to repair pneumatic and plc's on the Dye machines. The most important knowledge here is experience repairing winders. They have TCI and RotoCorner winders. Will also pull pumps for rebuild. They just invested heavily in a new Boiler and new PLC controllers for the machinery. This system was customized for them so they will train. Need someone with 75% mechanical skills and 25% electrical skills. Hours may eventually move from 6-4 Monday-Thursday and 6-2 on Friday to a 8-6 Monday-Thursday and 8-4 on Friday.

Apply Now More Info

Multi Craft Maintenance Technician

Charlotte NC (58 miles)

Multi-Craft Maintenance Technician immediately needed for a plastic manufacturer in South Charlotte. Hours: 12-Hour Shifts (7:00am-7:00pm) or 7:00pm-7:00am) Will train 7:00am - 3:00pm Pay: $22 - $25 per hour DOE Essential Responsibilities: Install, troubleshoot and repair complex mechanical equiment and distribution systems, involving work of varied nature with minimum supervision. Will use analytical and solutions oriented thinking to bring reliability to all machines and processes. Benefits: Company offers full benefits: Medical Dental Weekly Pay Check Holiday Pay Excellent Location - Convenient to I-485 and I-77

Apply Now More Info

Machine Operator

Charlotte NC (58 miles)

Experienced Machine Operators needed for a plastic coating company in South Charlotte area.  

Hours:    2nd Shift  -  7:00pm - 7:00am

Pay:    $14/hour

Job Duties:

  • Will set up extruding machine to make products per customer request
  • Perform measurements throughout the process to ensure quality product
  • Operate multiple machines daily including a slitter and guillotine 
  • Ability to work overtime as business dictates

Benefits:

  • Cool environment in the summer!
  • Family type atmosphere
  • Lots of growth potential
  • Medical Benefits
  • Very close to I-77 and I-485

l!

Apply Now More Info

Textile Machine Operator

Charlotte NC (60 miles)

Textile manufacturer of woven material for the safety industry immediately seeking experienced Machine Operators for their growing team. Company provides safety first, climate controlled environment with opportunity for growth. 

Hours:

  • 12-hour shifts
  • 7pm - 7am
  • 2-2-3 work schedule

Pay:

  • $13.00 during training
  • $13.40 per hour once on the overnight shift

Benefits:

 

  • Excellent work schedule!
  • Convenient to I-85, Gastonia, Belmont and Charlotte
  • Excellent benefits including medical, dental, 401K, etc

 

Apply Now More Info

Machine Operator

Charlotte NC (60 miles)

Start your new career today! Manufacturing company in Charlotte hiring Production Machine Operators!

 

Hours: 3rd shift- 11:00pm-7:30am

Pay: $12/hr 

Essential Duties and Responsibilities:

  • Inspect products for defects and trim excess plastic from parts.
  • Assemble various components onto plastic products
  • Operate and learn various machines in plant

Benefits:

  • Easy access from I-85 and I-277!
  • Insurance after 90 days!
  • Quarterly Bonuses in your FIRST YEAR!
  • Paid Holidays & PTO!
  • Stable company!

Requirements:

  • Recent Manufacturing Experience
  • Good Technical Aptitude
  • Ability to lift and move 40lbs regularly

 

Apply Now More Info